TAPECOAT H35 GRAY - 35 mil cold applied, UV resistant tape coating with an 8 mil multipolymer alloy film (MAF) backing and 27 mils of adhesive with integrated primer, for ambient temperature below and above grade application.
Appropriate for coating small to moderate size pipe with a single layer; a 50% overlap may be preferred when coating larger diameter pipe.
H35G Please click here for H35 Gray PDF Product sheet.

Tapecoat H50 Gray Cold-applied above and below ground coating in tape form with an integrated primer. Tapecoat H35 Gray and Tapecoat H50 Gray are designed to protect above and below ground metal surfaces from corrosion and electrolysis. They are used for coating pipe, girth welds, fittings, couplings, tanks, pipetype cable, conduit, tie rods, elevator casings and other metal surfaces. Their unique MAF? backing hasbeen specially formulated to provide strength that allows it to be pulled tightly around fittings and other irregular shapes with minimal pull back due to memory. Tapecoat H35 Gray and Tapecoat H50 Gray employ an integrated primer and are resistant to UV rays, thermal expansion, impact and abrasion. Both tapes can be applied over a wide range of ambient temperatures. Composition Tapecoat H35 Gray and Tapecoat H50 Gray are composed of a Gray specially formulated MAF? backing with a synthetic elastomeric adhesive. Impregnated into the adhesive is an integrated primer.
Tapecoat
H50G Please click here for H50 Gray PDF Product sheet.

M50 RC Gray Heavy-duty below ground pipeline recoating material in tape form with an integrated primer. Tapecoat M50 RC Gray is designed to protect below ground metal surfaces from corrosion and electrolysis. It is used for coating pipe, girth welds, fittings, couplings, tanks, pipe type cable, conduit, tie rods, elevator casings and other metal surfaces. Tapecoat M50 RC Gray is resistant to thermal expansion, impact and abrasion and employs an integrated primer. Composition Tapecoat M50 RC Gray is a pre-formed, cold-applied coating. The adhesive is manufactured from specially formulated elastomer and resins bonded to a woven highly puncture-resistant polymer. Impregnated into the adhesive is an integrated primer. 
 Please click here for M50 Gray PDF Product sheet.

 TC G-25 Tarp Repair Tape is an economical and quick repair for torn, ripped, or damaged tarpaulins. Because less down time is required, repairs with G-25 are more cost effective than those made at repair facilities. G-25 is also ideal for seaming, sealing, and repairing geo-membranes (pond liners, landfill liners, etc.). TC
G-25 is a specially formulated, UV resistant repair tape manufactured for use where abrasion, puncture, and leak resistance is important. With minimum preparation, a truck driver can make a repair that is more effective than that with duct tape. TC G-25 Tarp Repair Tape is for the repair of existing tarpaulins and the installation of new geo-membranes. TC G-25 is designed to provide an air, vapor, water tight seal. Its unique MAF? backing has been specially formulated to provide strength that allows it to be pulled tightly. G-25 is resistant to UV rays, thermal expansion, impact, abrasion and can be applied over a wide range of ambient temperatures.
Please click here for  TC G25 PDF

Tapecoat 6025 Gray High Temperature Tape Cold-applied coating in tape form for use in high temperature pipeline applications with a MAF? backing is designed to protect above and below ground pipe, pipe type cable, girth welds, fittings, tanks, insulated steam lines, and other metal surfaces from corrosion and electrolysis over a wide range of in-service temperatures up to as high as 250?F (121?c) in constant or peak load operating conditions. Tapecoat 6025 Gray and TC Omniprime may be applied to new pipelines and to pipelines in service operating at elevated temperatures. Composition Tapecoat 6025 Gray is composed of a specifically formulated MAF backing and a synthetic elastomeric, temperature resistant coating.
Please click here for Tapecoat 6025 Hi-Temp Tape PDF

Tapecoat HT/MB High Temperature Coating exceeds all performance criteria for prevention of corrosion of buried pipelines, pipe joints/fittings, and other metal surfaces. Tapecoat HT/MB and TC 7030 are recommended for use on high-temp pipelines with a maximum constant operating temperature of up to 310? F (154 ?C). Tapecoat HT/MB works best when used with high-temp TC 7000 Epoxy Primer. Tapecoat HT/MB is a 40 mil coating, applied with a 50% overlap, for below grade application. Tapecoat HT/MB is a cold applied, self-adhering coating that is impermeable to water and salt. An aggressive high temperature adhesive is laminated to the HT/MB polypropylene mesh backing. The woven mesh backing gives the coating added strength against soil stress. Appropriate for coating below grade pipe with operation temperatures up to 300oF. Use TC OMNIPRIME primer when operation temperatures will not exceed 180?F; use TC 7000 EPOXY as a primer for operation temperatures to 300?F.
Please click here for HT/MB PDF