Polyetylene Gas Lines
RW Lyall Anodeless Risers 
3/4", 1" 1-1/4", 1-1/2", & 2" NPT anodeless risers available
Custon Steel Coated Risers 3", 4", & 6" welded anode risers
PE2706 Pipe
Butt Fusion Fittings
Socket Fusion Fittings
Mechanical Fittings - Perfection Permasert® Couplings
- Dresser Mechanical Couplings
- Continental Mechanical Couplings
Tracer Wire
Rw Lyall Transition Fittings 3/4", 1" 1-1/4", 1-1/2", 2", 3", 4" & 6" IPS
Mueller Insulated Valves 34", 1", 1-1/4", 1-1/2", & 2"
H-11175 H11179
Insulated Unions
Perfection Fittings
Permasert® Mechanical Couplings
In 1976, Elster Perfection revolutionized natural gas distribution with the introduction of the first polyethylene, mechanical coupling...Permasert. Since that time, Permasert Couplings have been accepted as an industry standard and helped utilities throughout the world simplify service line installations and save money.
The Permasert® coupling has a pull-out strength greater than the connected polyethylene tubing. Its one-piece construction and design ensure consistent, gas-tight connections in all weather conditions. Permasert® couplings are non-corrosive and molded from industry leading PE4710/Bimodal PE3408 which provides significant performance advantages versus other polyethylene resins.More...
Permasert® Blind End Stubs and Caps
Permasert®Blind End Stubs and Caps safely shut off gas services or close the end of a service line. Blind End Stubs permanently shut off the gas service while Blind End Caps contain Permasert® components under the blind end allowing for easy connection to the gas line at a future date after removal of the cap.
Permasert® Blind End Stubs and Caps are among the most popular mechanical couplings sold by Elster Perfection because they provide outstanding cost savings and reliability versus other methods of terminating services. More...
Permasert® Reducing Couplings
Permasert® Reducing Couplings allow for fast and easy service line size reductions with just one fitting. Much faster to install than competing joining methods, this time and money saving coupling is available from ½” CTS to 2” IPS and is molded from industry leading PE4710/bimodal PE3408 resin for improved long term performance.
Permasert reducing couplings are non-corrosive and require no cathodic protection or protective coatings.More...
Permasert® Repair Coupling
Permasert Repair Couplings can cut repair time by 50 to 75% More...
Permasert® Tees and Ells
Permasert tees and ells are non-corrosive and require no cathodic protection or more...
|