Enviroshield Series R Module

The TC Enviroshield Series R module is designed for the maximum protection of offshore platform risers and lateral beams from the harsh marine environment. This easy field-applied modular system provides abrasion and corrosion pro-tection of existing and new marine structures. A tough outer abrasion-resistant jacket activates an en-capsulating environmentally-safe petrolatum with the tensioning of an easy-installation closure system. The TC Enviroshield allows for quick reinspection and easy accommodation of lateral braces, peripheral beams and weld-attached anodes. This easy field-applied protection can be installed in and out of the water on a wet or dry minimally prepared surface.

The TC Enviroshield Series R module is an easy field-applied maximum marine protection system. The Series R module provides proven corrosion protection, re-inspection capability, aesthetic appearance, accommodation for lateral braces and environmental sensitivity.

• Factory assembled for field installation
• Install on minimally prepared surface
• Apply to wet, dry, or underwater surface
• Inner petrolatum mat encapsulates and seals substrate
• Tough multi-layer urethane outer jacket
  Composite tensioning closure system forces petrolatum into pores of surface
• No metal components
• No hand tapping or exterior bands
• RE-INSPECTABLE
• Available in 5 ft. and 2.5 ft. length with a 3 in. overlap for longer requirements

Enviroshield Series S Module

Modular Marine Corrosion Protection System

The S Module protects square shaped piles and fluted mono piles. A multi-layer urethane outer jacket compresses a foam layer forcing a petrolatum inner mat into pores of the pile surface.

TC Enviroshield Series S Module seals the surface of square concrete piles and provides corrosion protection for fluted mono piles.

• Utilizes the same inner mat, outer jacket,and closure system as the R module
• Extra open-cell foam layer assures petrolatum mat continuous contact
  with flat pile or fluted surface
• One-piece factory assembled module for easy field installation
• RE-INSPECTABLE
   

Enviroshield Series T Module

Modular Marine Corrosion Protection System

The TC Marine borers have plagued mariners for centuries. In recent years their infestation has accelerated with the reduction of pollution in our waterways and harbors. The TC Enviroshield T Series module is an easy answer to this costly problem. This modular protection system is a permanent solution that stops borer infestation by restricting the flow of oxygenated water to timber pilings and marine wood.

TC Enviroshield Series T modules are designed with an abrasion-resistant outer jacket that incorporates a moldable gasket material. This field-applied marine protection can be installed in and out of the water on a minimally-prepared wet or dry surface.

TC Enviroshield Series T modules are designed to protect round, irregular and tapered timber pilings.

• Eliminates the flow of oxygenated water to pile surface
• Lowers the dissolved oxygen content of the water inside the pile wrap
• Tapecoat’s unique Moldable Sealant provides vertical,top and bottom seal
• Flexible EPDM outer jacket is UV resistant, will not harden, become brittle or crack over time